Shubham Dixit, data erasure and forensics expert

Written by Jennifer Walsh. Reviewed for technical accuracy by Shubham Dixit, Independent Expert in Email Forensics and Data File Conversion. Updated 12 October 2026.

Shubham is an independent external reviewer and not an employee of PCDOTS.

Quick answer. To delete data from a CCTV camera, format the hard drive in the DVR or NVR menu, which clears all the recordings. There’s a catch, a format can be recovered, so to delete CCTV data permanently you overwrite the drive with a secure erase. A DVR also deletes old footage on its own, by overwriting the oldest when the disk is full.

How do you delete data from a CCTV camera?

You delete data from a CCTV camera by clearing the drive it records to, not the camera itself. The footage lives on the hard drive inside the DVR or NVR, or on an SD card in a standalone camera.

So there are two levels. A format in the recorder menu wipes all the recordings and frees the space, which is what most people want. But a format can be undone with recovery software, so if the footage is sensitive, or you’re selling the kit, you overwrite the drive to delete the CCTV data for good.

There’s also the hands-off option. A DVR deletes old footage on its own, because it records in a loop and writes over the oldest clips once the disk is full. Here’s how the storage works, then the steps to delete data from CCTV camera, free and for good.

CCTV camerarecords to the recorder DVR or NVR hard driverecords in a loopoverwrites the oldest format the driveclears it, but recoverable overwrite the drivepermanent, unrecoverable

A CCTV camera records to a DVR hard drive that loops and overwrites, and you clear it two ways, a format that’s recoverable or an overwrite that’s permanent.

“The mistake I see most is treating a format as if it’s gone forever. It isn’t. A format clears the index, but the video blocks sit on the disk until new recording writes over them, and recovery software can pull a lot of it back in the meantime. For clearing space that’s fine. For anything sensitive, or a drive you’re about to sell, the only safe delete is an overwrite that replaces the data with new patterns. I always overwrite a drive before it leaves the building, then spot-check that nothing reads back.” Shubham Dixit, Data File reviewer (draft, pending approval)

How does a CCTV camera store and overwrite footage?

A DVR or NVR records to an internal hard drive in a continuous loop. When the disk fills, it writes new footage over the oldest, so recordings drop off the back on their own.

That’s why CCTV footage seems to delete itself. How long it lasts depends on the disk size, the number of cameras and the resolution, and most setups hold somewhere between 15 and 30 days before the oldest footage is overwritten. You can check yours by opening Playback and finding the earliest date with recordings.

So if you only need old footage gone, you can wait and let the loop handle it. To clear it now, or to clear it for good, use one of the methods below.

How do you delete CCTV footage from a DVR or NVR?

You delete the footage by formatting the hard drive from the recorder menu. A format erases every recording on the drive, so back up anything you want to keep first.

Here are the five steps, with the menu names for Hikvision and CP Plus.

  1. Connect a monitor and mouse to the DVR or NVR, then sign in as the admin.
  2. Right-click for the Main Menu, then open Storage, then the HDD screen. Hikvision calls it HDD General or Disk Management, CP Plus calls it HDD Manager.
  3. Tick the hard disk in the list and check its status.
  4. Select Format, or Init on Hikvision, then confirm the warning.
  5. Wait for the status to read Normal or Healthy. Don’t cut the power while it formats.

Dahua recorders follow the same route, Main Menu, Storage, then HDD Manage, with a Format option. The drive is now empty and recording starts fresh. Remember, this clears the footage from view but leaves it recoverable, the permanent step is further down.

Before you delete. If the footage relates to an incident, a crime or a data request, don’t delete it. A home user or a business may face retention rules that require keeping CCTV footage while a matter is open, so check first and export a copy if you’re unsure.

sign in as adminon the DVR or NVR Main Menu, Storagethen the HDD screen Format or Initconfirm the warning Normalcleared

Sign in, open Main Menu then Storage then the HDD screen, tick the disk, select Format or Init and wait for Normal.

Can you delete a single clip or one day of footage?

Mostly, no. Most DVRs and NVRs don’t let you delete one clip or a single day from the menu. The drive is built for loop recording, not for picking footage out.

Your options for a single clip

  • Some models allow it. A few Hikvision recorders have a Delete under Playback, then File Management, by the timeline. If yours has it, you can remove the clips you select.
  • Export, then format. If it doesn’t, export the clips you want to keep to a USB drive, then format the disk to clear the rest.
  • Delete on a PC. Pull the drive, connect it to a computer and delete the chosen recording files, handy when you want just a few gone.

One note, locking a clip only protects it from being overwritten. It doesn’t delete the rest, so don’t rely on it as a delete.

How do you delete CCTV data permanently?

To delete CCTV data permanently, you overwrite the drive, you don’t just format it. A format or a plain delete leaves the footage on the disk until new recording lands on top, and recovery software can read it back until then. An overwrite replaces the data with fresh patterns, so it can’t be recovered.

A secure erase matters before you sell or scrap a DVR, hand a drive back to a leasing firm or clear footage for privacy. PCDOTS Data Erasure Tool overwrites a drive on Windows to a recognised wiping standard, so the footage is gone for good. Follow these four steps.

  1. Back up any footage you need, then shut down the DVR and remove its hard drive.
  2. Connect the drive to a Windows PC with a SATA dock or cable.
  3. Open the eraser, select Wipe Disk and select the connected drive.
  4. Select an overwrite method and start the wipe. When it finishes, the footage can’t be recovered.

Honest scope. An eraser works on a drive attached to a Windows PC. It can’t reach a live DVR over the network, and it can’t erase footage held in a provider’s cloud. For cloud recordings, delete them in the provider app and ask the provider to purge their backups.

1Remove HDDfrom theDVR 2Connectto a WindowsPC 3Wipe Diskselect thedrive 4Overwritegone forgood iOnly clearing space? The free DVR format above does that without removing the drive.

Remove the drive, connect it to a PC, select Wipe Disk and overwrite, so the footage can’t be recovered.

Free Download
Buy Now

format vs overwrite format the driveclears all recordingsfree, in the DVR menustill recoverable overwrite the drivereplaces the datafor sale, scrap or privacypermanent, unrecoverable

A format clears the view but stays recoverable, an overwrite replaces the data and is permanent.

Which method should you use?

Use a format to free up space, an overwrite to delete for good and let the loop handle old footage you don’t care about.

Method Best for Good to know
Format the HDD Clearing space fast Free, in the DVR menu, but recoverable
Let the loop overwrite Old footage you don’t need Automatic, oldest goes first, no control
Overwrite the drive Permanent, before disposal Windows, removes the drive, unrecoverable

Not sure which fits? Match why you’re clearing the footage to the route below.

why you’re clearing it, your route Just need the space backthe disk is full Format the HDD, free Old footage you don’t neednothing to keep Let the loop overwrite it One clip or day gonekeep the rest Export the rest, then format Selling, scrapping or privacymust be unrecoverable Overwrite the drive

Match why you’re clearing the footage to the route, free space formats, old footage loops out, one clip exports then formats, disposal overwrites.

Key takeaways

  • CCTV footage lives on the DVR or NVR hard drive, so you delete it by clearing that drive.
  • Format the HDD from the recorder menu to clear all recordings and free the space.
  • A format is recoverable, so overwrite the drive to delete CCTV data permanently.
  • A DVR also auto-deletes, by overwriting the oldest footage once the disk is full.

Frequently asked questions

Does CCTV footage get deleted automatically?
Yes. A DVR records in a loop and writes over the oldest footage once the disk is full, so recordings drop off on their own, usually after about 15 to 30 days depending on the disk size and cameras.

How do I delete CCTV footage permanently?
Overwrite the drive, don’t just format it. A format leaves the footage recoverable until new recording lands on top. An overwrite replaces the data with fresh patterns, so it can’t be recovered.

Can I delete a single clip or one day of footage?
Usually not from the DVR menu. Some Hikvision models allow it under Playback, File Management. Otherwise export what you want to keep, then format, or pull the drive and delete files on a PC.

How do I format the hard drive on a Hikvision or CP Plus DVR?
Open Main Menu, Storage, then the HDD screen. Hikvision calls it HDD General and uses Init, CP Plus calls it HDD Manager and uses Format. Tick the disk, confirm and wait for Normal.

Can deleted CCTV footage be recovered?
Often yes, after a format or a plain delete, until new footage overwrites it. That’s why a secure overwrite is the only way to make CCTV data unrecoverable.

How do I delete footage stored in the cloud?
Delete it in the camera provider’s app or portal, then ask the provider to purge their backups. A desktop eraser only reaches a drive connected to your own PC.

Can I delete CCTV footage from a mobile or phone app?
Most mobile apps don’t delete recorded footage, they only play it back. To clear local recordings, format the disk from the DVR or NVR, or a desktop client. For cloud clips, delete them in the provider app.

So how are you clearing your CCTV footage?

Deleting data from a CCTV camera comes down to the drive. Format the hard disk in the DVR or NVR menu to clear the recordings, let the loop overwrite the old footage you don’t need, or overwrite the entire drive to delete the CCTV data permanently before the kit changes hands. Choose the one that matches why you’re clearing it. So how are you clearing your CCTV footage, a quick format, or a full overwrite for good?

Shubham Dixit

Reviewed by Shubham Dixit · Author Jennifer Walsh · Updated 12 October 2026

Independent Expert in Email Forensics and Data File Conversion. Shubham reviewed this guide for technical accuracy. He is an independent external reviewer and not an employee of PCDOTS.

Profile  |  LinkedIn